Відео

Yes, it will. Be sure to check the part number. It must be MDW023.

Turning gyro down helps a bit but the steering angle is not good enough to keep it sideways.

Weight do translate to momentum which these small cars don't have so that helps. Other important things are steering angle and the capability of the gyro. It needs a lot of steering angle couple with not twitchy gyro to be able to hold the drift.

This one is about 2mm narrower than R34 so it should fit if you shave the wheel arches off a bit. This body uses 0mm offset narrow wheel on all 4. The tyre size is actually the standard 20mm inner diameter. The Watanabe wheels supplied with the body have outer ring so you can keep using your old tyres.

@@BeaversHobby thanks a lot man, i’m gonna order it with a new pair of tires xD forgot that old ones are glued to the rims xD thanks a lot for your reply ❤️

I don't think they faked the drift (although I haven't watched other reviews yet). To my best ability with good surface, this car can do skids for a few seconds before snapping back so with good camera angle & cut it could appear to be drifting.

Hey dude that's interesting can you something different in regards to staying in its slide or does it also Fizz about like that, is it capable of drifting a smooth take

Thanks for the comment and I'm glad you like the car. But this is really not for me or I probably expected it to do much better than a bit of skidding before snapping back to straight.

May I know details of how you tune it? I tried for hours but it doesn’t work for me.

Not with this new version it works perfectly fine on any smooth platform

I think so. I have a similar mat. It makes the car more controllable but the car itself is just too small to be able to hold a drift.

I think the gyro is not the problem bc fpv all in one boards are tiny and they have esc gyro flight controls bms and some even an vtx and an antenna system all on one board that if you split and stack would definitely fit in there Just somebody need to build a brushless 1/76 with good gyro first then more will do it these are just brushed toys that still way better than most of this size

@@420Benzo u probably right, or maybe it’s not the product itself but the programming for it… everything gets trickier to tune as it gets smaller, and since mini z scale out and they started making more similar size cars the product has just gotten better, hopefully in a couple years we will have rwd 1/76 driftable cars that drift how we want them too 😊👊

124 scale my man, you don't know ?

@@tommyrossracing i think that he ment 1/24 1/28 referring to the mini Z

@@tommyrossracing yeah 1/24-1/28 all basically mini z scale

G7P is better. It has better performance, better receivers and better battery compatibility. If you will also use it with a car with 4 wheel steering, G7P also has a dedicated mixing mode for it.

The curve is to adjust the initial response of the control. For example you can make the steering or throttle less responsive around the centre by adjusting the curve to be more flat at the beginning. It will help if you feel that the steering is too twitchy or steer too quickly when you turn the wheel. In this case you can use the curve to make it less responsive around the centre.

@@BeaversHobby thank you, will just try to play with the settings.

The protocol is still unknown. Usually these cars have their own protocols and are not compatible with anything else .

@@BeaversHobbyoh I see. So a new receiver and ESC would be needed. Thanks for the info and awesome video!!!

@@danielsimental2803 Yes, you'll need to install your own receiver and ESC. And don't forget the gyro.

Unfortunately, no. There's RWD version of this chassis, HGD1 and HGV1 (budget version) so take a look at those instead.

Front spring set part number Kyosho MDW201. Rear spring set part number Kyosho MDW004. Front one way Kyosho MDW017. Rear solid axle Kyosho MDW024 but you can just lock the original diff.

Not sure the version it comes with but if there's a dip switch with NOR-RWV, flick that to another side. If there's only a button then normally when the car is on, hold the button for 3 seconds or until the light blinks. It'll reverse the direction.

@@BeaversHobby unfortunately it doesn't have the rev switch and holding the button doesn't do anything. Ill pick up a new gyro. Thanks beaver.

It's the drift version of Dodge, right? It's coming.

@@BeaversHobby yes, I’m working on a mod where you would use a c64 steering arm to give toe out

JST-ZH 1.5mm 3 pin

The classic is for the standard receivers like FGr4, 4S and 4P. The enhanced mode is for the newer receivers with onboard gyro or other functions like GMR (it doesn't have onboard gyro but it has a port for the gyro module) and INr4-GYB.